Pay attention to our latest news and exhibitions.
Sealant strips: used for sliding windows, sliding doors, rubber strips for casement windows, casement doors, top-hung windows, etc., to prevent leakage or intrusion of internal and external media (rain, air, sand, etc.), and to prevent Or reduce the damage caused by mechanical vibration and impact, so as to achieve the functions of sealing, sound insulation, heat insulation and shock absorption. Wool tops are generally used on the door or window sashes of sliding doors or windows to play the role of cushioning, shock absorption, sealing and heat preservation.
Instructions:
1. First understand the specifications of wool tops. Before the specific operation, it is necessary to know the specifications of the tops. Although the molds for push-pull doors and windows are basically similar, some door and window series are different, and the profile specifications will also be different. So before you do it, you need to know which kind of wool top to use. There are many specifications of wool tops, such as 5*6, 5*7, 5*8, 5*9, 6*8, 9*9 and so on.
Specifications and types of tops:
2. Determine whether the top is used on a sliding door or a sliding window. It is best to use siliconized clip tops for the tops on the door. The middle clip is double-layered plastic, which has better sealing performance. The tops used on the windows can be ordinary wool tops or high-density wool tops.
Top use place:
3. The top is installed around the door and window sash or on the windshield block and the position where it slides up and down. There is a notch for wearing a wool top at the corresponding position of the profile. First measure the length of the wool strips used, and put the wool strips in along one end of the notch. Note that the side with the wool strips is near the outer opening.
Wool installation method:
4. The position where the aluminum sliding sash of the broken bridge is combined with the side seal, that is, the window frame, must wear double tops. Because the broken bridge aluminum is composed of inner and outer surfaces connected by heat-insulating strips, it is a double wool top when wearing wool tops. The choice of wool top must be consistent with the size of the notch. If it is too large, it will not be closed tightly, and if it is too small, it will fall off easily.
The size of the wool should be the same as that of the aluminum:
5. When wearing the wool top, the length of the wool top should be moderate, not too long, if it is too long, it will not be smooth to push and pull. When wearing wool tops, make the wool tops smooth, with a good sense of outer fluff, and the color should match the color of the profile.
The length of strips and doors and windows should be at least one:
6. The installation method of the top is simple. As a door and window enterprise, there are special personnel responsible for putting on the top before the next step of production can be carried out. The main function of wool tops is to isolate indoor and outdoor air, keep warm, and at the same time protect the edges of doors and windows from impact damage and prolong the life of doors and windows.
7. It is very convenient to install as long as you find the right notch and the right top.
