Advantages and usage methods of door and window sealing strips

Door and window sealing strips play a key role in wooden doors, anti-theft doors, sliding doors, various aluminum-plastic doors and windows and other doors and windows. The most obvious is anti-vibration. After installing it on the door stop line, it reduces (or even disappears) the impact sound when closing the door (window), protects the edge of the door leaf, prolongs the life of the door, and reduces noise. The second is sealing, shock absorption, and isolation of indoor and outdoor air, which effectively plays a role in heat preservation and energy saving, and prevents mosquitoes and other small bugs from entering the room.

Product advantages of door and window sealing tops

Strong sealing, anti-aging life after 15 years

1. The sealing performance is 5 times higher than that of ordinary products

2. Reduce friction and prolong service life

3. Increase density and reduce noise

4. Strong adhesiveness, easy to paste, and long-lasting adhesion

5. The back glue adopts high-grade environmental protection glue

6. Soft and plush, there will be no scratches when in contact with the plane

7. It is suitable for doors, windows, frames, etc., which can prevent dust, wind, mosquitoes, and violent collisions, etc.

8. Multiple colors are available

Instructions

1 First clean the surface to be pasted to make the surface clean, smooth, flat and dry.

2 Test the height of the door and window, according to this length, cut the sealing strip with scissors.

3 Peel off a small piece of adhesive protective paper, install the sealing strip to the correct position and press it tightly, and it should be aligned with the top edge as much as possible.

4. The adhesive backing protection paper should be peeled off continuously, so that the sealing strip extends downward along the frame, and it is pressed continuously, and it should not be stretched. Use the same method to install the horizontal sealing strip, pay attention to the matching of the corner joints, and there should be no gaps between the joints.